plotEha {astrochron} | R Documentation |

Create color time-frequency plots from eha results.

```
plotEha(spec,xmin,xmax,ymin,ymax,h=6,w=4,ydir=1,pl=0,norm,palette=6,
centerZero=T,ncolors=100,colorscale=F,xlab,ylab,filetype=0,output=T,verbose=T)
```

`spec` |
Time-frequency spectral results to evaluate. Must have the following format: column 1=frequency; remaining columns (2 to n)=power, amplitude or probability; titles for columns 2 to n must be the location (depth or height). Note that this format is ouput by function eha. |

`xmin` |
Minimum frequency for PLOTTING. |

`xmax` |
Maximum frequency for PLOTTING. |

`ymin` |
Minimum depth/height for PLOTTING. |

`ymax` |
Maximum depth/height for PLOTTING. |

`h` |
Height of plot in inches. |

`w` |
Width of plot in inches. |

`ydir` |
Direction for y-axis in plots (depth or height). -1 = values increase downwards (slower plotting!), 1 = values increase upwards. |

`pl` |
An option for the color plots (0=linear scale; 1=plot log of value [useful for plotting power], 2=normalize to maximum value in each window [useful for plotting amplitude], 3=use normalization provided in norm. |

`norm` |
Optional amplitude normalization divisor, consisting of a single column dataframe. This option is provided in case you'd like to normalize a set of EHA results using the same scheme (e.g., before and after removal of spectral lines). |

`palette` |
What color palette would you like to use? (1) rainbow, (2) grayscale, (3) blue, (4) red, (5) blue-white-red (if values are negative and positive, white is centered on zero), (6) viridis |

`centerZero` |
Center color scale on zero (use an equal number of postive and negative color divisions)? (T or F) |

`ncolors` |
Number of colors steps to use in palette. |

`colorscale` |
Include a color scale in the plot? (T or F) |

`xlab` |
Label for x-axis. Default = "Frequency" |

`ylab` |
Label for y-axis. Default = "Location" |

`filetype` |
Generate .pdf, .jpeg, .png or tiff file? (0=no; 1=pdf; 2=jpeg; 3=png; 4=tiff) |

`output` |
If amplitude is normalized (pl = 2), output normalization used? (T or F) |

`verbose` |
Verbose output? (T or F) |

```
## as an example, evaluate the modelA
data(modelA)
## interpolate to even sampling interval of 0.075 m
ex1=linterp(modelA, dt=0.075)
## perform EHA with a time-bandwidth parameter of 2, using an 7.95 meter window, 0.15 m step,
## and pad to 1000 points, output amplitude
res=eha(ex1,tbw=2,win=7.95,step=0.15,pad=1000,genplot=0,output=3)
# plot EHA amplitude, normalized to maximum value in each window
plotEha(res,xlab="Frequency (cycles/m)",ylab="Height (m)",pl=2)
```

[Package *astrochron* version 1.1 Index]