sm.variogram {sm}

Confidence intervals and tests based on smoothing an empirical variogram.

Description

This function constructs an empirical variogram, using the robust form of construction based on square-root absolute value differences of the data. Flexible regression is used to assess a variety of questions about the structure of the data used to construct the variogram, including independence, isotropy and stationarity. Confidence bands for the underlying variogram, and reference bands for the independence, isotropy and stationarity models, can also be constructed under the assumption that the errors in the data are approximately normally distributed.

Usage

sm.variogram(x, y, h, df.se = "automatic", max.dist = NA, n.zero.dist = 1,
             original.scale = TRUE, varmat = FALSE, ...)

Arguments

x

a vector or two-column matrix of spatial location values.

y

a vector of responses observed at the spatial locations.

h

a smoothing parameter to be used on the distance scale. A normal kernel function is used and h is its standard deviation. However, if this argument is omitted h will be selected by an approximate degrees of freedom criterion, controlled by the df parameter. See sm.options for details.

df.se

the degrees of freedom used when smoothing the empirical variogram to estimate standard errors. The default value of "automatic" selects the degrees of smoothing described in the Bowman and Crujeiras (2013) reference below.

max.dist

this can be used to constrain the distances used in constructing the variogram. The default is to use all distances.

n.zero.dist

an integer value which sets the lower limit on the number of pairs of data points with distance zero (in other words the number of pairs whose positions are identical) to trigger a separate variogram bin for zero distance. Repeat observations at the same location can be informative about the variance of the underlying process. The default for n.zero.dist is 1, which will create a zero bin for any identical pairs. However, with small numbers of identical pairs the estimated variance associated with the zero bin may be large, so a higher setting of the n.zero.dist argument can be used to amalgamate the zero distances into the adjacent variogram bin.

This parameter has no effect when model = "isotropic" or model = "stationary" as the number of bins generated by the multiple dimensions becomes large in these cases, and so zero distances are not allocated a special bin.

original.scale

a logical value which determines whether the plots are constructed on the original variogram scale (the default) or on the square-root absolute value scale on which the calculations are performed.

varmat

a logical value which determines whether the variance matrix of the estimated variogram is returned.

...

other optional parameters are passed to the sm.options function, through a mechanism which limits their effect only to this call of the function.

An important parameter here is model which, for sm.variogram, can be set to "none", "independent", "isotropic" or "stationary". The latter two cases are appropriate only for 2-d data.

Other relevant parameters are add, eval.points, ngrid, se, xlab, ylab, xlim, ylim, lty; see the documentation of sm.options for their description. See the details section below for a discussion of the display and se parameters in this setting.

Details

The reference below describes the statistical methods used in the function.

Note that, apart from the simple case of the independence model, the calculations required are extensive and so the function can be slow.

The display argument has a special meaning for this function. Its default value is "binned", which plots the binned version of the empirical variogram. As usual, the value "none" will suppress the graphical display. Any other value will lead to a plot of the individual differences between all observations. This will lead to a very large number of plotted points, unless the dataset is small.

Value

A list with the following components:

sqrtdiff, distance

the raw differences and distances

sqrtdiff.mean, distance.mean

the binned differences and distances

weights

the frequencies of the bins

estimate

the values of the estimate at the evaluation points

eval.points

the evaluation points

h

the value of the smoothing parameter used

ibin

an indicator of the bin in which the distance between each pair of observations was placed

ipair

the indices of the original observations used to construct each pair

When model = "isotropic" or model = "stationary" the following components may also be returned, depending on the arguments passed in ... or the settings in sm.options:

p

the p-value of the test

se

the standard errors of the binned values (if the argument se was set to TRUE)

se.band

when an independence model is examined, this gives the standard error of the difference between the smooth estimate and the mean of all the data points, if a reference band has been requested

V

the variance matrix of the binned variogram. When model is set to "isotropic" or "stationary", the variance matrix is computed under those assumptions.

sdiff

the standardised difference between the estimate of the variogram and the reference model, evaluated at eval.points

levels

the levels of standardised difference at which contours are drawn in the case of model = "isotropy".

Side Effects

a plot on the current graphical device is produced, unless the option display = "none" is set.

References

Diblasi, A. and Bowman, A.W. (2001). On the use of the variogram for checking independence in a Gaussian spatial process. Biometrics, 57, 211-218.

Bowman, A.W. and Crujeiras, R.M. (2013). Inference for variograms. Computational Statistics and Data Analysis, 66, 19-31.

See Also

sm.regression, sm.options

Examples

## Not run: 
with(coalash, {
   Position <- cbind(East, North)
   sm.options(list(df = 6, se = TRUE))

   par(mfrow=c(2,2))
   sm.variogram(Position, Percent, original.scale = FALSE, se = FALSE)
   sm.variogram(Position, Percent, original.scale = FALSE)
   sm.variogram(Position, Percent, original.scale = FALSE, model = "independent")
   sm.variogram(East,     Percent, original.scale = FALSE, model = "independent")
   par(mfrow=c(1,1))
})

# Comparison of Co in March and September
   
with(mosses, {
	
   nbins <- 12
   vgm.m <- sm.variogram(loc.m, Co.m, nbins = nbins, original.scale = TRUE,
                        ylim = c(0, 1.5))
   vgm.s <- sm.variogram(loc.s, Co.s, nbins = nbins, original.scale = TRUE,
                        add = TRUE, col.points = "blue")
                        
   trns <- function(x) (x / 0.977741)^4
   del <- 1000
   plot(vgm.m$distance.mean, trns(vgm.m$sqrtdiff.mean), type = "b",
         ylim = c(0, 1.5), xlab = "Distance", ylab = "Semi-variogram")
   points(vgm.s$distance.mean - del, trns(vgm.s$sqrtdiff.mean), type = "b",
         col = "blue", pch = 2, lty = 2)

   plot(vgm.m$distance.mean, trns(vgm.m$sqrtdiff.mean), type = "b",
         ylim = c(0, 1.5), xlab = "Distance", ylab = "Semi-variogram")
   points(vgm.s$distance.mean - del, trns(vgm.s$sqrtdiff.mean), type = "b",
         col = "blue", pch = 2, lty = 2)
   segments(vgm.m$distance.mean, trns(vgm.m$sqrtdiff.mean - 2 * vgm.m$se),
         vgm.m$distance.mean, trns(vgm.m$sqrtdiff.mean + 2 * vgm.m$se))
   segments(vgm.s$distance.mean - del, trns(vgm.s$sqrtdiff.mean - 2 * vgm.s$se),
         vgm.s$distance.mean - del, trns(vgm.s$sqrtdiff.mean + 2 * vgm.s$se),
         col = "blue", lty = 2)

   mn <- (vgm.m$sqrtdiff.mean + vgm.s$sqrtdiff.mean) / 2
   se <- sqrt(vgm.m$se^2 + vgm.s$se^2)
   plot(vgm.m$distance.mean, trns(vgm.m$sqrtdiff.mean), type = "n",
        ylim = c(0, 1.5), xlab = "Distance", ylab = "Semi-variogram")
   polygon(c(vgm.m$distance.mean, rev(vgm.m$distance.mean)),
        c(trns(mn - se), rev(trns(mn + se))),
        border = NA, col = "lightblue")  
   points(vgm.m$distance.mean, trns(vgm.m$sqrtdiff.mean))
   points(vgm.s$distance.mean, trns(vgm.s$sqrtdiff.mean), col = "blue", pch = 2)

   vgm1 <- sm.variogram(loc.m, Co.m, nbins = nbins, varmat = TRUE, 
                        display = "none")
   vgm2 <- sm.variogram(loc.s, Co.s, nbins = nbins, varmat = TRUE,
                        display = "none")

   nbin  <- length(vgm1$distance.mean)
   vdiff <- vgm1$sqrtdiff.mean - vgm2$sqrtdiff.mean
   tstat <- c(vdiff %*% solve(vgm1$V + vgm2$V) %*% vdiff)
   pval  <- 1 - pchisq(tstat, nbin)
   print(pval)
})

# Assessing isotropy for Hg in March

with(mosses, {
   sm.variogram(loc.m, Hg.m, model = "isotropic")
})

# Assessing stationarity for Hg in September

with(mosses, {
   vgm.sty <- sm.variogram(loc.s, Hg.s, model = "stationary")
   i <- 1
   image(vgm.sty$eval.points[[1]], vgm.sty$eval.points[[2]], vgm.sty$estimate[ , , i],
         col = topo.colors(20))
   contour(vgm.sty$eval.points[[1]], vgm.sty$eval.points[[2]], vgm.sty$sdiff[ , , i],
         col = "red", add = TRUE)
})


## End(Not run)