neutron_geom_cf {radsafer}R Documentation

Solid Angle Correction for Neutron Detectors with Point Source

Description

Correction factors are needed when an Neutron Rem Detector (NRD) aka "Remball" is used in close proximity to a points source. This formula is per ISO ISO 8529-2-2000 section 6.2. Note, however, that the ISO formula predicts the response. The formula used here takes the inverse to correct for the over-response.

Usage

neutron_geom_cf(l, r.d, del = 0.5)

Arguments

l

The distance from the center of the detector to the center of the source. Units of l and r.d must be consistent.

r.d

The detector radius. Value for typical NRD is 11 cm. An example is also provided with a Rem 500 detector with a radius of 4.5 cm.

del

The neutron effectiveness factor, default per ISO.

Value

The correction factor for solid angle.

See Also

Other rad measurements: air_dens_cf(), disk_to_disk_solid_angle(), scaler_sim(), tau_estimate()

Examples

neutron_geom_cf(l = 11.1, r.d = 11)
neutron_geom_cf(30, 11)
neutron_geom_cf(5, 4.5)

[Package radsafer version 2.3.0 Index]