DAISIE_MW_ML {DAISIE}R Documentation

Maximization of the loglikelihood under the DAISIE model with clade-specific diversity-dependence and explicit dependencies on island area and isolation as hypothesized by MacArthur & Wilson

Description

This function computes the maximum likelihood estimates of the parameters of the relationships between parameters of the DAISIE model (with clade-specific diversity-dependence) and island area and distance of the island to the mainland for data from lineages colonizing several islands/archipelagos. It also outputs the corresponding loglikelihood that can be used in model comparisons.

A note on the sigmoidal functions used in distance_dep: For anagenesis and cladogenesis, the functional relationship is k * (d/d0)^x/(1 + (d/d0)^x); for colonization the relationship is: k - k * (d/d0)^x/(1 + (d/d0)^x). The d0 parameter is the 11th parameter entered. In 'sigmoidal_col_ana', the 11th parameter is the d0 for colonization and the 12th is the d0 for anagenesis.

Usage

DAISIE_MW_ML(
  datalist,
  initparsopt,
  idparsopt,
  parsfix,
  idparsfix,
  res = 100,
  ddmodel = 11,
  cond = 0,
  island_ontogeny = NA,
  tol = c(1e-04, 1e-05, 1e-07),
  maxiter = 1000 * round((1.25)^length(idparsopt)),
  methode = "lsodes",
  optimmethod = "subplex",
  CS_version = 1,
  verbose = 0,
  tolint = c(1e-16, 1e-10),
  distance_type = "continent",
  distance_dep = "power",
  parallel = "local",
  cpus = 3,
  num_cycles = 1
)

Arguments

datalist

Data object containing information on colonisation and branching times of species for several islands or archipelagos, as well as the area, isolation and age of each of the islands/archipelagos. See data(archipelagos41) for an example.

initparsopt

The initial values of the parameters that must be optimized; they are all positive

idparsopt

The ids of the parameters that must be optimized. The ids are defined as follows (see Valente et al 2020 Supplementary Tables 1 and 2 a better explanation of the models and parameters):

id = 1 corresponds to lambda^c0 (cladogenesis rate for unit area)
id = 2 corresponds to y (exponent of area for cladogenesis rate)
id = 3 corresponds to mu0 (extinction rate for unit area)
id = 4 corresponds to x (exponent of 1/area for extinction rate)
id = 5 corresponds to K0 (clade-level carrying capacity for unit area)
id = 6 corresponds to z (exponent of area for clade-level carrying capacity)
id = 7 corresponds to gamma0 (immigration rate for unit distance)
id = 8 corresponds to alpha (exponent of 1/distance for immigration rate)
id = 9 corresponds to lambda^a0 (anagenesis rate for unit distance)
id = 10 corresponds to beta (exponent of 1/distance for anagenesis rate)
id = 11 corresponds to d0 in models M15 to M19, and models with distance_dep = 'sigmoidal_col', 'sigmoidal_ana' or 'sigmoidal_clado'; or d0 for colonisation (when specifying distance_dep = 'sigmoidal_col_ana'
id = 12 corresponds to d0 for anagenesis when specifying distance_dep = 'sigmoidal_col_ana'

parsfix

The values of the parameters that should not be optimized

idparsfix

The ids of the parameters that should not be optimized, e.g. c(1,3) if lambda^c and K should not be optimized.

res

Sets the maximum number of species for which a probability must be computed, must be larger than the size of the largest clade

ddmodel

Sets the model of diversity-dependence:

ddmodel = 0 : no diversity dependence
ddmodel = 1 : linear dependence in speciation rate
ddmodel = 11: linear dependence in speciation rate and in immigration rate
ddmodel = 2 : exponential dependence in speciation rate
ddmodel = 21: exponential dependence in speciation rate and in immigration rate

cond

cond = 0 : conditioning on island age
cond = 1 : conditioning on island age and non-extinction of the island biota

island_ontogeny

type of island ontonogeny. If NA, then constant ontogeny is assumed

tol

Sets the tolerances in the optimization. Consists of:
reltolx = relative tolerance of parameter values in optimization
reltolf = relative tolerance of function value in optimization
abstolx = absolute tolerance of parameter values in optimization

maxiter

Sets the maximum number of iterations in the optimization

methode

Method of the ODE-solver. See package deSolve for details. Default is "lsodes"

optimmethod

Method used in likelihood optimization. Default is "subplex" (see subplex package). Alternative is 'simplex' which was the method in previous versions.

CS_version

a numeric or list. Default is 1 for the standard DAISIE model, for a relaxed-rate model a list with the following elements:

  • model: the CS model to run, options are 1 for single rate DAISIE model, 2 for multi-rate DAISIE, or 0 for IW test model.

  • relaxed_par: the parameter to relax (integrate over). Options are "cladogenesis", "extinction", "carrying_capacity", "immigration", or "anagenesis".

verbose

sets whether parameters and likelihood should be printed (1) or not (0)

tolint

Vector of two elements containing the absolute and relative tolerance of the integration

distance_type

Use 'continent' if the distance to the continent should be used, use 'nearest_big' if the distance to the nearest big landmass should be used, and use 'biologically_realistic' if the distance should take into account some biologically realism, e.g. an average of the previous two if both are thought to contribute.

distance_dep

Sets what type of distance dependence should be used. Default is a power law, denoted as 'power' (models M1-14 in Valente et al 2020). Alternatives are additive or interactive contributions of distance and area to the rate of cladogenesis ("area_additive_clado"; "area_interactive_clado", "area_interactive_clado1" and "area_interactive_clado2"). Other alternatives are exponential relationship denoted by 'exp'; or sigmoids, either 'sigmoidal_col' for a sigmoid in the colonization, 'sigmoidal_ana' for sigmoidal anagenesis, 'sigmoidal_clado' for sigmoidal cladogenesis, and 'sigmoidal_col_ana' for sigmoids in both colonization and anagenesis.
A key for the different options of distance_dep that should be specified to run the models from Valente et al 2020 (Supplementary Data Table 1 and 2) is given below:
* M1 to M14 - 'power'
* M15 -'area_additive_clado'
* M16 and M19 -'area_interactive_clado'
* M17 -'area_interactive_clado1'
* M18 - 'area_interactive_clado2'
* M20 and M24 - sigmoidal_col'
* M21, M25 and M28 - sigmoidal_ana'
* M22 and M26 - 'sigmoidal_clado'
* M23 and M27 - 'sigmoidal_col_ana'

parallel

Sets whether parallel computation should be used. Use 'no' if no parallel computing should be used, 'cluster' for parallel computing on a unix/linux cluster, and 'local' for parallel computation on a local machine.

cpus

Number of cpus used in parallel computing. Default is 3. Will not have an effect if parallel = 'no'.

num_cycles

The number of cycles the optimizer will go through. Default is 1.

Value

The output is a dataframe containing estimated parameters and maximum loglikelihood.

lambda_c0

gives the maximum likelihood estimate of lambda^c, the rate of cladogenesis for unit area

y

gives the maximum likelihood estimate of y, the exponent of area for the rate of cladogenesis

mu0

gives the maximum likelihood estimate of mu0, the extinction rate

x

gives the maximum likelihood estimate of x, the exponent of 1/area for the extinction rate

K0

gives the maximum likelihood estimate of K0, the carrying-capacity for unit area

z

gives the maximum likelihood estimate of z, the exponent of area for the carrying capacity

gamma0

gives the maximum likelihood estimate of gamma0, the immigration rate for unit distance

y

gives the maximum likelihood estimate of alpha, the exponent of 1/distance for the rate of colonization

lambda_a0

gives the maximum likelihood estimate of lambda^a0, the rate of anagenesis for unit distance

beta

gives the maximum likelihood estimate of beta, the exponent of 1/distance for the rate of anagenesis

loglik

gives the maximum loglikelihood

df

gives the number of estimated parameters, i.e. degrees of feedom

conv

gives a message on convergence of optimization; conv = 0 means convergence

Author(s)

Rampal S. Etienne & Luis Valente

References

Valente L, Phillimore AB, Melo M, Warren BH, Clegg SM, Havenstein K, Tiedemann R, Illera JC, Thébaud C, Aschenbach T, Etienne RS. A simple dynamic model explains island bird diversity worldwide (2020) Nature, 579, 92-96

See Also

DAISIE_ML_CS,

Examples


cat("
### Fit the M19 model as in Valente et al 2020, using the ML
parameters as starting values (see Supplementary Tables 1 and 2).

utils::data(archipelagos41)

DAISIE_MW_ML(
datalist= archipelagos41,
initparsopt =
c(0.040073803,	1.945656546,	0.150429656,
67.25643672,	0.293635061,	0.059096872,	0.382688527,
0.026510781),
idparsopt = c(1,3,4,7,8,9,10,11),
parsfix = c(0,Inf,0) ,
idparsfix = c(2,5,6),
res = 100,
ddmodel = 0,
methode = 'lsodes',
cpus = 4,
parallel = 'local',
optimmethod = 'subplex',
tol = c(1E-4, 1E-5, 1E-7),
distance_type = 'continent',
distance_dep = 'area_interactive_clado'
)
")

[Package DAISIE version 4.4.1 Index]